Sony PMW-400 +CA +HXCU +RCP +VF

Description

ENG Cameras setted in studio configuration composed by:

2x Sony PMW-400 with ENG vf

1x Sony STUDIO VF

3x Sony DXF-CA 50 camera adapter

3x Sony CCU HXCU TX70

2x SONY RCP-1500 or RCP-750 ccu remote

Key Features

Three 2/3‑inch “Exmor” Full HD CMOS sensors.
Prism system with F1.4 optics. Multi‑format recording: standard formats include MPEG‑2 HD422 at 50 Mbps; MPEG HD (420) at 35/25 Mbps; MPEG IMX (SD) at 50 Mbps; DVCAM; and future (or optional) support for XAVC HD422 10‑bit.

Specification	Detail
Resolution	Up to 1920×1080 (Full HD).
Sensor size	2/3‑inch type.
Lens / Zoom	16× optical zoom (servo/manual), 8‑128 mm (wide to tele) on the lens that comes with the “K” kit version.
Aperture (Iris)	F1.9 to F16, plus “Close”. Auto/manual selectable.
Minimum focus distance	With Macro OFF: ~800 mm; Macro ON wide: ~50 mm; Macro ON tele: ~732 mm.

Sensitivity: about F12 in 59.94i mode; about F13 in 50i mode.
Minimum illumination: approx. 0.003 lux (1080/59.94i, F1.9, +42 dB gain, 64‑frame accumulation) in very low light.
Signal‑to‑noise ratio: ~60 dB (typical) with 3DNR (three‑dimensional noise reduction) engaged.

Format	Bit rate / Mode	Frame Rates / Comments
MPEG‑2 HD422	50 Mbps (CBR)	HD standard; interlaced and progressive depending on region.
MPEG HD (420)	35 Mbps, 25 Mbps	VBR modes.
MPEG IMX (SD)	50 Mbps	Standard definition mode.
DVCAM (SD)	25 Mbps	SD mode.
XAVC (optional/upgrade)	e.g. XAVC‑I 100 Mbps, HD422, etc.	Higher quality, 10‑bit.
Frame rates supported	1080i (50i / 59.94i), 29.97p, 25p, 23.98p; 720p in various framerates.

LCD monitor: 3.5‑inch color LCD, resolution approx. 960×540.
Viewfinder is high resolution; similar resolution in EVF provided as accessory.
Other monitoring features: zebra, peaking, mirror display, diopter correction, display text on/off, etc.

Video out: SDI (two BNCs; HD‑SDI / SD‑SDI selectable), HDMI output.
Genlock input, Timecode in/out (via BNC).
Audio: XLR inputs (mic/line, with +48V phantom on some), ~4 channels in many modes.
Other connectors: i.LINK (FireWire), USB, accessory connectors; a 50‑pin interface (CBK‑CE01) optional for converting into system camera / triax / fiber capability.

Specification	Value
Weight / Mass	Approx. 3.4 kg for the body only (without lens, viewfinder, microphone).
Dimensions	~124 × 269 × 332 mm (W × H × D), body only, excluding protrusions.
Power supply	DC 12 V.
Power consumption	~23‑26 W (with viewfinder, lens, mic while recording).
Battery time	Approx. 180 minutes using the BP‑L80S battery.
Operating temperature	0°C to 40°C.
Storage temperature	‑20°C to +60°C.